top of page

Materials/Accessories

m_steel.jpg

Galvanized Steel

​

All of our materials used are 100% galvanized

. 14 Gauge: Is 2.5’’x 2.5’’ in diameter rectangular tubing and comes standard.

. 12 Gauge: Is 2.25’’ x 2.25’’ in diameter rectangular tubing. Comes with a 20-Year Rust Through Warranty

carport-bows-and-truss.jpg

Trusses/Bows

​

Trusses/Bows are a single piece of tubing bent to create the requested width. Vary from sizes of 12 feet wide up to 60 feet wide.

m_walkin.jpg
m_baserail.jpg

Base Rail

​

The base rail is the foundation of the building, each welded sleeve is approximately 4ft apart to 5ft center to center. 

m_panels.jpg

Sheet Panels

​

They are 29 gauge in thickness (Standard) or upgrade to 26 gauge. Each panel is 3' Wide and 21', 26', 31',36',41',... Long. Our longest single panel is 31'. Available in 16 colors.

Window (2).png

Walk-In Door

​

Sizes:

. 32'' x 72" 

. 36" x 80"

​

Look and Size may vary depending on Manufacturers 

m_rollup.jpg

Roll-Up Doors

​

Sizes:

​

Garage Roll-Ups                   Garage Commercial Roll-Ups

        . 6' x 7'                                                   . 10' x 12' 

        . 8' x 7'                                                   . 12' x 12' 

        . 9' x 7'                                                   . 14' x 12'

        . 10' x 8'                                                 . 14' x 14'

        . 10' x 10'

                                      Width x Height

​

Look, and Size may vary depending on Manufacturers 

Windows

​

Sizes:

. 24'' x 36" 

. 30" x 36"

. 36" x 36"

​

Look and Size may vary depending on Manufacturers 

Insulation

​

Insulation is essential if you plan on storing classic cars and temperature sensitive vehicles in your garage. We can install bubble installation in the units that we build to help insulate from the cold and heat.

Screw 2 (2).jpg

Skylights/ Clear Panels

​

Sizes:

3' Wide x 10' Long

3' Wide x 12' Long

​

Note: Skylights can only be installed on Vertical Roof

Look, and Size may vary depending on Manufacturers 

Self Tapping Screw

​

. Used to secure all framework, paneling and trim together.

. 5/8mm hex, 12mm x 3/4mm galvanized screws with a rubber washer to stop leakage.

Untitled-1.png

Standard Anchors

​

All buildings anchored to ground come with pin anchors unless the building is being anchored down on concrete.

​

. Rebar Anchors: 36" Long x 5/8" Thick

​

. Concrete Anchors: 6" Long x 1/2" Thick

​

Size may vary depending on Manufacturers 

m_rebar.jpg

Additional Anchoring

​

All buildings anchored to ground come with pin anchors unless the building is being anchored down on the concrete.

​

. Mobile Home Anchors:

30" Long with 8" Twist Plate

Recommend for Ground Install

​

. Rock Anchor:

30" Long with 3/4" Shaft

Recommend for Rock/Gravel Install

​

. Asphalt Anchors:

30" Long with 3/4" Shaft

Recommend for Asphalt Install

​

Size may vary depending on Manufacturers 

Additional Anchors
Standard Anchors
m_brace.jpg

Braces

​

These 18 gauge braces are used for center bracing and corner bracing. Comes in lengths of 2' & 3'.

m_hatChannel.jpg

Hat Channels

​

Frame piece on A-frame Vertical roof that runs horizontally so sheet panels can be attached.

m_jTrim.jpg

J Trim

​

Used to trim out windows and walk-in doors. Available in 16 colors.

m_lTrim.jpg

L Trim

​

Used to trim out roll-up doors and edges of sheet panels for horizontal roofs/sides. Available in 16 colors.

m_ridgecap.jpg

Ridgecap Trim

​

Used for the peak of an A-frame Vertical where sheet panels meet. Available in 16 colors.

m_boxedEve.jpg

Boxed Eave trim

​

Used to cover truss overhang on A-frame styles where roof and side panels meet. Available in 16 colors.

bottom of page